How I bend wood at home.
Instead of going through the hassle of building a wooden box to steam bend wood, I decided to use a 200mm (8"), thick wall irrigation pipe. Made the whole process quick and easy.
The pipe I used is 2.5m (8ft) long as I am planning on bending longer pieces of wood in the future.
Used an old 20L (5 gal.) oil drum I cleaned up and filled with water to generate the steam needed to bend the wood.
To feed the steam from the steam generator to the steam box I used a piece of silicone type pipe.
Everything held up well considering the heat associated with generating and using steam.
Visit https://woodworkjunkie.com for more.
Remember, generating steam in an enclosure can cause an explosion. If you build a steam box always add a pressure release hole for steam to escape.
IMPORTANT - Disclaimer!
All of the videos on this channel are intended for entertainment purposes only.
Should you choose to make or do anything as depicted on this channel you would do so at your own risk.
Woodworking and the use of power tools can be extremely dangerous.
The equipment and methods I use may not work for you as it does for me and by no means do I suggest that my methods of
working are correct.
Therefore you should always use your equipment and power tools as instructed by the owners manual supplied by the manufacturer.
Always use protective gear where applicable and never attempt something you are not comfortable doing.
Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do.
Please, stay safe and work smart.